The Condux Fixed Head Innerduct Pulling Eye features tapered buttress threads thread into the innerduct for maximum pulling strength.
These eyes connect directly to a Condux swivel.
When properly sized and installed, these eyes will not pull out of the innerduct until the pulling tensions have greatly exceeded the maximum pulling tensions reccomended by the innderduct manufacturers.
Download the compatibility chart to determine what Innerduct Pulling Eyes work with the different size Innerduct Ranges, Innerduct SDR Ratings, Swivels, Pulling Harnesses and Threaded Chain Connectors.
Condux Polyethelene and PVC Pulling Eyes provide optimum gripping power and a water tight design.
The water tight pulling eyes feature:
Multiple O-ring configuration
Extremely rigid center rod to prevent bending
Steel tapered lead cone with the same OD as the conduit
Installation simply requires the leading eye to be tightened. The pulling eyes come standard with attachement eyes at both ends for connecting rope or steel lines. Pull out strengths generally exceed the tensile capactity of the conduit.
This Condux Clevis Head Innerduct Pulling Eye features the same tapered threads as the standard innerduct pulling eye as well as the following features:
Includes a slotted head with a clevis pin to permit direct attachment to any multiple pulling harness leg ends
Won't pull out of the innerduct until the pulling tensions have greatly exceed the maximum pulling tensions reccomended by the innerduct manufacturers
Download the compatibility chart to determine what Innerduct Pulling Eyes work with the different size Innerduct Ranges, Innerduct SDR Ratings, Swivels, Pulling Harnesses and Threaded Chain Connectors.
The Condux Innerduct Pulling Eye is a hybrid tool that combines features from standard innerduct pulling eyes and Condux swivels.
A swivel head prevents twisting and binding of the innerduct as it is installed. It eliminates the need for separate swivels on each pulling eye when installing single innerducts into individual conduits or multiples innderducts into a single conduit.
Download the compatibility chart to determine what Innerduct Pulling Eyes work with the different size Innerduct Ranges, Innerduct SDR Ratings, Swivels, Pulling Harnesses and Threaded Chain Connectors.
(7) These solid steel pullers are machined with a tapered buttress thread to grip the inside wall of polyethylene pipe and innerduct by simply screwing them into the opening. When properly installed, the gripping power of the puller is stronger than the tensile strength of the pipe or innerduct. Pullers are installed quickly and easily with a screwdriver shaft or metal rod. Typical uses are pulling polyethylene water pipe, gas pipe, and cable ducting with a vibratory plow. Installing innerduct inside a large cable duct. Installing pipe and ducting in Horizontal and Directional Drilling applications.
(7) The Wedge Grip Pipe and Duct Grip is designed for pipe pulling (including vibratory plowing) and boring pull backs. Its extreme ease of use, broad gripping range and rugged design make it an ideal grip for underground contractors. Coupling and uncoupling the pipe and duct can be done in just a few seconds without any tools. The grip's cone shaped end cover reduces snagging, provides a smooth bore hole and most importantly, keeps dirt out of the pipe.
(5) Maxi Grips are adurable and economical tools designed for pulling underground pipe and cable with speed and ease. Maxi Grips consist of two primary components - a uniquely designed steel nose cone device and a heavy duty coated galvanized steel mesh grip. The Maxi Grip accommodates multiple sizes of pipe and cable, thereby minimizing congractor tooling costs. The tapered nose cone provides a large, smooth, compacted boring for pipe and cable to follow, thus reducing friction and allowing longer pulls. The large boring eliminates cable "looping" when boring under walkways and driveways. The nose cone design also eliminates the need to seal pipe opening against outside contamination. The user merely slips the pipe into the nose cone ...
(4) Maxi Grips are adurable and economical tools designed for pulling underground pipe and cable with speed and ease. Maxi Grips consist of two primary components - a uniquely designed steel nose cone device and a heavy duty coated galvanized steel mesh grip. The Maxi Grip accommodates multiple sizes of pipe and cable, thereby minimizing congractor tooling costs. The tapered nose cone provides a large, smooth, compacted boring for pipe and cable to follow, thus reducing friction and allowing longer pulls. The large boring eliminates cable "looping" when boring under walkways and driveways. The nose cone design also eliminates the need to seal pipe opening against outside contamination. The user merely slips the pipe into the nose cone ...
(5) The Swivel Eye Maxi Grips are designed to help relieve the twisting forces that are created when pulling pipe and cable underground. Today, they are being used extensively in the Directional Boring Industry to relieve destructive pulling torque on pipe and cable. All Swivel eye assemblies are custome manufactured from Forged Cabon and Alloy Steels that are Heat Treated to ASTM Standards for strength and wear resistance. Swivel Eye assemblies are attached to Maxi Grips, both mechanically by thread and MIG welding, to insure maximum tensile strength and service life.
Translate
