(24) Condux Fiber Optic Cable Blowers can install up to 300 feet of fiber optic cable per minute. Thanks to the Cable Carrier which is always attached to the end of your cable, the cable travels at the same speed as the air! Compressed air propels the carrier and cable through the air-tight sealed duct. Condux features a wide array of carriers for any cable blowing job, and you may choose your type and size from the list below.
(3) For fiber optic cable blowing, the correct size cable seals and venturi must be determined for the cable being installed. Also necessary are the correct size innerduct seals, clamps and carrier for the innerduct being occupied. Seals and clamps are preselected in common replacement Duct Packs, or you may select below from a range of individually listed sizes and colors of innerduct clamps and seals.
The Condux Compressed Air Cooler can help prevent heat damage to fiber optic cable and duct during cable blowing operations. The Compressed Air Cooler cools the compressed air from a maxiumum of 350° F to within 20° F of the ambient temperature. It also removes moisture from the compressed air that would dilute cable blowing lubricant.
Use of the Condux Compressed Air Cooler is recommended when ambient air temperatures reach 90° F or more and/or the duct is exposed to direct sunlight.
Translate
